Instagram is one of the most popular social networks existing today. Continuing the series of instructions on this project, we will tell you how to change your Instagram password if you forgot your old one. And immediately, without delay, let’s get down to business.
The instructions you will find below are suitable for both Android smartphones and iPhones running the iOS operating system. The fact is that their applications are almost the same.
How to change the password in VK in the new version to a new one?
The need to change the password may arise if the profile has been compromised, if the administration has detected an unauthorized entry into the profile. In such situations, the user will be asked to replace their credentials. This is not a password recovery, but a password replacement. It's not difficult to do. You will need to perform the following sequence of actions:
- You need to go to “Settings”.
- Open the drop-down menu in the upper right corner and activate the desired link.
- You need to go to the “Password” section and then “Change”.
After completing these steps, a special form will open. Enter the old password and enter the new one twice. Then activate the “Change Password” entry. In certain situations, the user will be asked to immediately confirm the action via SMS. The received code will need to be entered into a special form. If the actions are performed correctly, the password will be completely changed.
If the need to change the password arose due to an attempt or completed hacking of the profile, it is worth coming up with a more complex password.
What is a password and why is it needed in VK
Surely 99% of you know this. But as an introduction, let's say it again.
As credentials used to enter the VK page, we indicate the user name (email or phone, see also how to find out the VKontakte password knowing the login), as well as a secret set of characters - our password. This is a security measure to ensure that only we can access your account. Unless, of course, an attacker can hack our password and gain access to our page (see how to hack a VKontakte page). But more on that below.
Let me remind you that the password is indicated in the login form.
How to change the password in VK on a computer?
If your password has been lost or forgotten, you will need to use the “Forgot your password?” function to recover it. You need to click on it and enter your account information – phone and email. After entering them, you need to activate the “Next” button. In some cases, the system may require additional data to improve security. Certain users may be asked to enter a last name.
If all the data has been entered correctly, the system will show your personal profile page and ask you to confirm that the user performing the action is strictly its owner.
If, after opening the profile, it became clear that it was her, you just need to click on the confirmation message.
A code is sent to the registered phone number. You will need to enter it in a special form and click on “Recover Password”. After this, a familiar form designed to change your password automatically opens. You need to enter a new password twice and confirm the operation. The personal password is guaranteed to be changed after this.
After carrying out such actions, you will need to log into your VK profile with this particular password.
If the old password is unknown
So, if the old password is known, changing it is much easier than promoting a group on VK; if it is forgotten or unknown, the situation becomes somewhat more complicated.
Without access to a linked phone or email
The social network regularly prompts the user to link their email address to the page, but there is nothing to say about a cell number: without specifying and confirming it, it is impossible to register on VKontakte.
And yet, the mail may remain unspecified, and the phone with a SIM card may remain inaccessible; Don’t despair - you can still access your account and change your password under such circumstances:
- By going to the vk.com page and entering your login, the user must click on the “Forgot your password?” link.
- Now click on the “Click Here” link under the text field to enter your cell number or email address.
- On the new page, the user will be asked to enter their ID - it can be standard, issued automatically by the system, or personalized if the account owner took the trouble to change it.
- If this information is also unknown, you should click on the “Click here” link under the editable field and find your page in the general list, and along the way, think about whether it would be easier to create a new page.
- As a result, the visitor will find his account.
- In the electronic form that opens, you will need to enter data that will allow the VKontakte administration to verify that the page really belongs to its owner and click on the “Submit Application” button.
- Now, after passing a series of additional tests, the user will have to wait for the application to be processed.
Important: the process takes from a day to several days. As a result, if there is enough evidence of ownership of the page, the account owner will have access to his data and will be able to change the password in the manner described above.
If you have access to a linked phone or email
If the owner of the VK account can use the cell number or email address linked to the page, you can change the password much faster:
- Once again on the access restoration page, you need to enter your phone number in the only editable field.
- Or email address.
- And click on the “Next” button. Assuring the system that he is not a robot.
- The user must enter the last name specified in the profile on the new page.
- Confirm that access to this particular page should be restored.
- And indicate whether the account is connected on any other devices. You can safely click on the “No” link - no one will check the information.
- On the new page, the user will be asked, if he specified his cell number as the recovery data, to send an SMS to it. By clicking on the “Get code” button.
- The page owner must wait for the text message to arrive and enter the one-time password it contains in the text field.
- If the SMS does not arrive for a long time, you can request a resend or order an incoming call - the last four digits of the number will become the access code.
- Password received; the user must enter it and click on the “Send code” button.
- And on the new page, enter and confirm the new password, and then click on the “Submit” button.
- At this point the task can be considered completed.
- If an email address is used for recovery, an email containing a link will be sent to the specified mailbox. By clicking on it, the account owner.
- You must enter your e-mail again, and also enter your new password twice.
Important: you cannot request a password change through the recovery form too often. In the best case, the VK system will prompt the user to wait for a while, and in the worst case, it will freeze the page due to suspicious activity.
How to change the password in VK from your phone?
If suspicious activity was noticed on the VK page, if you accidentally clicked on a suspicious link, or if suspicious data was entered, you must immediately change your password. This can be done not only on a PC in a browser, but also using a mobile application downloaded to a new Android phone.
To carry out this process, you will need to go to the section for logging into your personal page, but do not enter your password and login, but click, when deciding how to change your password on VKontakte, on the “Forgot your password” function.
Further recovery will proceed according to the usual scheme, that is, by receiving an SMS message.
#3 If you don’t have access to your phone
The most problematic situation is the lack of access to your phone number linked to the page. But even in this case, there is a way of how and where to change the VKontakte password if you don’t remember the old one. It consists of 3 steps:
- Click under the form for filling out personal data “Forgot?”;
- Under the fill line, click “Click here”;
- Next, you will need to provide a link to your social network profile and fill out basic information.
The administration will make a decision regarding the possibility of restoring the entrance.
Separately, it is worth highlighting the point about how often you can change the password on VK: the administration of the social network does not create restrictions in this regard.
How can I change my contact password if I forgot my old one?
Regardless of the chosen password change method, you must pay attention to its complexity. It is necessary to understand that a good password must consist not only of letters, but also of numbers. The best option would be to alternate them. Regular, easy-to-crack passwords should be abandoned. This is the only way to effectively protect your data and profile from strangers. To avoid password recovery, it is advisable to save the created complex password on paper or on a disk on your computer.
Is it possible to get a password from other people's pages?
There are two ways here - hacking and purchasing (see fake VKontakte pages login and password).
As for the first option, I have already discussed it in detail. See all the information in the article - how to hack a VK page knowing your login.
The second option is more humane. There are a large number of services on the network that sell VKontakte pages. These can be abandoned accounts of real people, as well as profiles that were specially made for sale. You can use them to send messages, get likes on your ava, etc.
Where to find such services, and how to buy pages correctly, read here - buy a VKontakte account .
How to change your facebook password from your phone: video
Now you know how to change your Facebook password. Unfortunately, there is no way to recover your old account password on Facebook. But this is not so bad, considering that it will be much easier to come up with and remember a new password.
Thank you for your interest in the article. If you found it useful, please do the following:
- Share with friends using the social media button
- Write a comment at the bottom of the page - share tips, express your opinion
- Check out similar articles below, you might find them helpful.
All the best!
Change the password on your computer if you forgot. Set, change and remove passwords on your computer
Quite often, while working on a personal computer, the question arises about how to change the password on the computer. This point is very important, especially in software products of the Windows family. With its help, you not only provide access to work on your PC, but also from it over the network. It is recommended to perform this procedure on average once a month. This will allow you to obtain an acceptable level of security for your data.
There are two ways to change the password on your computer:
- using the control panel;
- through the menu from the “Ctrl+Alt+Del” keys (immediately you need to simultaneously press the first two keys, then, without releasing them, press the third).
In the first case, everything is very simple. Performs a standard login using your existing access code. Then click and select “Control Panel” in the menu that opens. In the window that opens, find the “Users” shortcut. Click on it with the left mouse button twice. The window that opens will display all user accounts registered on the computer. Here you can change or delete the administrator password. To do this you need to know him. Open the administrator’s profile window and find the item “Change access code” in it. To change, you need to fill in all three lines of the window that opens, and to delete only the first, leaving the rest empty.
If you need to perform this operation for your profile, then open the window of its parameters. Then we proceed directly to solving the question of how to change the password on the computer. To do this, go to the menu item - “Change password”. You need to point at it and double-click on it with the same button. In the window that opens, you must enter the old password in the first line, and the new one in the two lower ones. After completing the manipulations, you should save them, and to do this you need to press the appropriate button. This method is suitable for all operating systems of this software developer.
Now let's move on to the second answer to the question of how to change the password on a Windows 7 or Vista computer. It's much simpler. But it only works on these two systems. To begin, log in normally using the old PC access code. Then, as indicated earlier, press “Ctrl+Alt+Del” (first you need to simultaneously press the first two keys, then, without releasing them, press the third). A corresponding menu will open in which you need to select the “Change password” item. It’s worth making a reservation right away: you can make changes only for the active profile, that is, under which you logged in. All others can be changed only in the previously specified way. After double-clicking on this menu item, a similar password change window will open, which was described earlier, consisting of three lines. In the first one we enter the old password, and in the next two - the new one. Save and exit the menu.
This article shows the two most common ways to change the password on a computer running all operating systems of the Windows family, with the exception of 8. Which method to choose is a personal matter for each user.
In order to set a password for a user on Windows7, there are several ways:
1 METHOD.
The first method requires a minimum of effort, namely, press the key combination
“Ctr” + “Alt” + “Del”
.
In the menu that appears, select “Change password.”
Enter the old password (if you have not used a password before, leave the field blank) and the new password with confirmation. I recommend using a complex password of at least 6 characters with numbers, upper and lowercase letters and special characters (@,#,$...)
After this, a window will appear indicating that the task of changing the password has been successfully completed.
2 METHOD.
To change the password in the second way, you need to click on the “
Start
” button and the user’s picture (or click
“Start” - “Control Panel”
(select Small icons) -
“Account Management”
).
In the User Accounts window, click “ Change your password”
«.
After this, enter the old password (if the password has not been used, the field must be left blank) and enter the new password with confirmation. You can specify a password hint if you doubt that you will always remember it. At the end, don't forget to click " Change Password"
«.
How to set a password for an account in Windows XP.
In Windows XP, changing the user password is no different from changing the password in Windows 7. The only difference is a different interface, but nevertheless, I will describe step by step how to change the password in this operating system.
There are several ways to change your password in Windows XP:
1 METHOD Using the key combination “Ctr” + “Alt” + “Del”.
METHOD 2 In the user account settings.
1 METHOD.
Press the key combination
“Ctr” + “Alt” + “Del”.
In the Windows Security window, click “
Change Password
” (also used to create a password if it has not been used before).
Enter the old password (if the password has not been used, leave the field blank) and the new password with confirmation. I recommend using a complex password of at least 6 characters with numbers, upper and lowercase letters and special characters (@,#,$...).
If everything is done correctly, you will receive a message indicating that your password was successfully changed.
2 METHOD.
Click the
“Start” button - “Control Panel” - “User Accounts”
Select the user whose password needs to be changed. In this example, this is the Administrator.
Then click “ Change Password”
«.
Enter the old password (if the password has not been used, leave the field blank) and enter the new password twice (the second time in the Confirmation field). If you doubt that you will always remember the password, enter a guiding phrase in the hint field to remember the password. At the end, don’t forget to click the “ Change Password”
«.
I really hope that this article helped you quickly set or change a password and protect your computer from unwanted guests.
Installing an individual security key is one of the simplest and most effective ways to protect personal information from unauthorized access. But while this practice is widespread in organizations, individuals do not think much about at least finding out how to set a password on a computer. In fact, the most difficult thing when setting a password is coming up with one. All other actions are performed quite simply and quickly.
The easiest way to hack a system is to try different passwords. They do this using special programs that quickly check whether you have used repeating or sequential characters in the security key, your personal data, popular words or their modified form (2 instead of to, 4 instead of for, etc.) .
It’s ideal if you come up with a phrase, insert a symbol between words, use different case, or even distort the spelling a little. True, such a cipher must be written down, otherwise you will have to look for how to remove the password from the computer.
You can name at least two more ways to come up with a complex code word. The first is to insert another word inside one word. The second is to take a well-known phrase and create a word from the first letters of the words that make up it. Proverbs, sayings, catchphrases, your favorite quotes, etc. are great for these purposes. For greater reliability, dilute the resulting abbreviation with numbers and use different case.
To check the reliability of the security key, you can use special services that will clearly demonstrate how difficult it will be to unravel the encrypted word using various programs and manual selection.
Changing and recovering your password
You can change the password on your computer by resetting it. To do this, you will need a bootable USB flash drive or LiveCD. After launching the main installer window, select “System Restore”.
Then enable Command Prompt by selecting it in the next window.
Enter the following command in it: copy c:\windows\system32\sethc.exe c:\
This command is responsible for backing up the file that is responsible for sticky keys. Why is this? In the next step, we will replace the original file with the executable one by typing the command copy c:\windows\system32\cmd.exe c:\windows\system32\sethc.exe.
After the reboot, we will get the following situation - pressing Shift five times, which is responsible for activating sticky keys, now launches the command line as Administrator.
To reset the password and set a new one, type the command: net user User_name New_password. You enter your username based on your account name, and create a new password.
You can also recover your computer password using the registry. Enter Safe Mode, open Command Prompt, type "regedit" and press Enter.
In order to ensure maximum security of information on a PC or laptop, you will need to put passwords on them. However, as practice shows, such a measure is not always sufficient. But there is still a way out. You need to change your password from time to time, then your security will increase significantly. Moreover, this procedure does not take much time, and there are many benefits from it. But not everyone knows how to change the password on a computer, but this can be done in several ways.
